fillet weld
英 [ˈfɪlɪt weld]
美 [fɪˈleɪ weld]
角焊；填角焊；条焊
双语例句
- Quality Control of the Fillet Weld in the Tube and Tube Sheet of Heat Exchanger Steel plate butt-welding pipe fittings
换热器管-管板角焊缝焊接质量的控制 - Application of ultrasonic sensor in automatical welding of right-angle welding seam Analysis on welder's operating methods influencing quality of fillet weld of stainless sheet plate
超声波传感器在直角焊缝自动焊接中的应用焊工操作手法对不锈钢薄板角焊缝质量的影响 - In order to improve detection precision, the method of detecting T-type fillet weld lack of penetration height was discussed using ramp probe in the wing.
为提高检测精度，探讨了用斜探头在翼板上检测T型角焊缝未焊透高度的方法。 - Fillet Weld Tracking System Based on PLC and Optical Sensor
基于PLC和光学传感器的角焊缝跟踪系统 - Causes Analysis and Disposal on Cracks in Clapboard Fillet Weld of Large Scale Steam Turbine LP Cylinders
大型汽轮机隔板静叶焊缝裂纹的原因分析及处理措施 - Grooving in the skirt of coke drum is able to lighten the stiffness impact on the skirt and reduce the thermal stress on its fillet weld.
在焦炭塔裙座上开设柔性槽能够减轻裙座刚度影响，降低裙座角焊缝处热应力。 - The length of each leg of the fillet weld shall be equal.
每条填角焊脚的长度应相等。 - In order to overcome the limitations of fillet weld shape dimension by manual inspection, an inspection method based on laser vision sensing is adopted.
针对目前角焊缝外形尺寸手工检测的缺点，采用了一种基于激光视觉传感的角焊缝外形尺寸检测方法。 - Ultrasonic Testing for Fillet Weld of Thermocouple in Coal-Fired Power Plant
火力发电厂测温热电偶套管角焊缝的超声波检测 - Parameters optimization of fillet weld sealing joint in high pressure hydrogenation heat exchange
加氢换热器角焊缝密封接头焊接工艺参数优化加氢裂化装置高压空冷器风机的改造 - Analysis on welder's operating methods influencing quality of fillet weld of stainless sheet plate
焊工操作手法对不锈钢薄板角焊缝质量的影响 - After building a boiler with fillet weld connecting furnace tube and tubeplate, the practical stress and temperature measurements have been carryed out near the weld on the boiler.
制造了炉胆与管板连接为角焊缝结构的锅炉，对锅炉角焊缝区域进行了实际工况应力测试与温度测试。 - Calculation Section and Stress Analysis on Fillet Weld
填角焊缝计算截面及应力分析 - The strength of fillet welding joint is related not only to the fillet weld size, but also depends on the base metal strength matching.
角焊缝的强度不仅与焊脚尺寸有关，还取决于焊缝金属与母材强度的匹配。 - The joint shapes suited for CO_2 welding are designed Under which weld quality is still assured but the groove angle and size of fillet weld are reduced. By ways of these the productivity is increased and cost decreased.
提出了适合于CO2焊特点的接头形式，该接头形式在保证焊接质量前提下，减小了对接焊的坡口角度及角焊缝的焊脚尺寸，可以提高焊接生产率，降低成本。 - Fractures of Fillet Weld of Manhole Reinforcing Plate and its Repairing Welding
人孔加强板角焊缝的断裂及补焊 - An automatic CO2 welding device for elbow pipe and flange fillet weld joint is introduced in the paper.
介绍一种弯管和法兰角接接头填角焊的自动焊接装置。 - The properties of the joints with one side fillet weld connecting the webs to flanges in H shaped steel members used in light weight steel structures, have not been yet thoroughly researched by tests.
在轻型钢结构建筑中采用的以单面角焊缝连接翼缘和腹板的组合H形截面钢构件，其焊缝接头性能尚未得到充分的试验验证。 - The problems of process design of penetration fillet weld of crown block track girder
天车轨道梁熔透角焊缝工艺设计的几个问题 - A Study on Ultrasonic Flaw Detecting Method for Fillet Weld of Medium-sized Tube Seat in Steam Drum
汽包中径管管座角焊缝超声波探伤方法研究 - An investigation of the effect of shape of fillet weld joint on the crack fatigue life of oil tank
油罐角焊缝形状对裂纹疲劳寿命的影响 - Radiographic Examination for Fillet Weld of Tube-tube plate
换热管与管板角焊缝的射线检测研究 - Application of magnetic memory method in stress state detection of fillet weld joint on tube socket containing defects exceeding grade
磁记忆法在含超标缺陷管座角焊缝应力状态检测中的应用 - The influences of strength matching on fillet weld were analyzed. The relationships among fillet weld size, thickness of base metal and matching coefficient of strength were established.
分析了强度匹配对角焊缝设计的影响，建立了角焊缝焊脚尺寸与板厚，强度匹配系数之间的关系，讨论了强度匹配选择的依据。 - Strength calculation and matching analyses of fillet weld in steel structure
钢结构角焊缝强度计算与匹配分析 - Analysis of Defect Location by UT in the Fillet Weld of Insertion Nozzle on Spherical Head
球形封头插入式接管角焊缝超声波探伤中的缺陷定位分析 - Fatigue performance test research of fillet weld size of K-type butt weld of huge crane beam
吊车梁K型对接焊缝焊角尺寸疲劳性能试验研究 - For this method, the corrected approximation of inherent shear strain is exerted to the fillet weld zone as initial strain of the welded structure and angle distortion is predicted by elastic analysis.
该方法将角焊缝处固有剪切应变分量的修正近似值作为焊接结构的初始应变，施加在有限元模型相应的角焊缝区域，通过线弹性分析预测角焊缝焊接结构的角变形效应。